Update Galaxy Tab 3 7.0 T211 (WiFi) via XXAMGL Android 4.1.2 Jelly Bean Official Firmware [August Update]

XXAMGL Android 4.1.2 Jelly Bean latest official firmware is out and download is ready for the new Samsung Galaxy Tab 3 7.0 WiFi SM-T211. The Galaxy Tab 3 7.0 recently announced by Samsung and officially released just less than 2 months back, comes with the Android 4.1 Jelly Bean out of the box. Soon after the announcement Samsung started pushing firmware update for the device and already received a number of updates and here we have the latest official firmware update for the month of August for Galaxy Tab 3 7.0 T211 which is currently rolled out in several countries (list of countries with download link available below).  You can download the XXAMGL Android 4.1.2 Jelly Bean official firmware through system inbuilt OTA update feature from Settings>About Tablet>Software Update or connect your device to PC and use the Samsung Kies utility. For a manual update, you need to download the firmware and flash it on Galaxy Tab 3 7.0 T211 using our simple step by step manual update guide. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Tab 3 7.0 WiFi T211 because to install this firmware we will use ODIN utility. After installing official firmware XXAMGL Android 4.1.2 Jelly Bean you can always root your Galaxy Tab 3 7.0 WiFi T211 with the help of proper rooting method.

Galaxy Tab 3 7.0 T211 Official Firmware Update

Continue reading this page to install XXAMGL Android 4.1.2 Jelly Bean official firmware update in Galaxy Tab 3 7.0 WiFi T211 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAMGL Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Tab 3 7.0 WiFi T211 to XXAMGL Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Download Android 4.1.2 T211XXAMGL Firmware:

Download right firmware for your Galaxy Tab 3 7.0 T211 from the below list. Note that, firmware here which are Unbranded or not carrier branded, regardless of country or region, can be flash on any Galaxy Tab 3 7.0 T211.

Singapore: T211XXAMGL_T211OLBAMG3_XSP.zip

Philippines (Sun): T211XXAMGL_T211OLBAMG3_XTC.zip

Thailand: T211XXAMGL_T211OLBAMG3_THL.zip

Indonesia: T211XXAMGL_T211OLBAMG3_XSE.zip

Vietnam: T211XXAMGL_T211OLBAMG3_XXV.zip

Malaysia: T211XXAMGL_T211OLBAMG3_XME.zip

[Firmware for rest of the countries will be update here when available]

Warning!

We at Rooted Android write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Tab 3 7.0 WiFi T211. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the tablet should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android tablets.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Rooted Android is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Tab 3 7.0 WiFi T211 Latest USB Drivers

Since you will need to connect your tablet to your PC, so you will need to have your Galaxy Tab 3 7.0 WiFi T211 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAMGL Android 4.1.2 Jelly Bean official firmware update on Galaxy Tab 3 7.0 WiFi T211.

Pages: 1 2

Update Galaxy Tab 3 7.0 WiFi T211 via XXAMGA Android 4.1.2 Jelly Bean Official Firmware

Download and update the XXAMGA Android 4.1.2 Jelly Bean latest official firmware on the new Samsung Galaxy Tab 3 7.0 wiFi SM-T211. The Galaxy Tab 3 7.0 recently announced by Samsung and officially released just 1 month back, comes with the Android 4.1 Jelly Bean out of the box. Soon after the announcement Samsung started pushing firmware update for the device and already received a number of updates and here we have the latest official firmware update for Galaxy Tab 3 7.0 T211 which is currently rolled out in several countries.  You can download of the XXAMGA Android 4.1.2 Jelly Bean official firmware through system inbuilt OTA update feature from setting>about.software update or connect your device to PC and use the Kies utility. For a manual update, you need to download the firmware [link is available below] and flash it on Galaxy Tab 3 7.0 T211 using our simple step by step manual update guide. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Tab 3 7.0 WiFi T211 because to install this firmware we will use ODIN utility. After installing official firmware XXAMGA Android 4.1.2 Jelly Bean you can always root your Galaxy Tab 3 7.0 WiFi T211 with the help of proper rooting method.

Continue reading this page to install XXAMGA Android 4.1.2 Jelly Bean official firmware update in Galaxy Tab 3 7.0 WiFi T211 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAMGA Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Tab 3 7.0 WiFi T211 to XXAMGA Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Samsung Galaxy Tab 3 7.0

Download Android 4.1.2 T211XXAMGA Firmware:

Baltic: T211XXAMGA_T211OXXAMG2_SEB.zip

Open Austria: T211XXAMGA_T211ATOAMF3_ATO.zip

[Firmware for rest of the countries will be update here when available]

Warning!

We at Rooted Android write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Tab 3 7.0 WiFi T211. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the tablet should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android tablets.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Rooted Android is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Tab 3 7.0 WiFi T211 Latest USB Drivers

Since you will need to connect your tablet to your PC, so you will need to have your Galaxy Tab 3 7.0 WiFi T211 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAMGA Android 4.1.2 Jelly Bean official firmware update on Galaxy Tab 3 7.0 WiFi T211.

Pages: 1 2

Install XXAMER Android 4.1.2 Jelly Bean Official Firmware on Galaxy Tab 3 7.0 3G T210

Samsung Galaxy Tab 3 7.0 3G SM-T210 received another official Android 4.1.2 Jelly Bean firmware update recently. Samsung is rolling out an OTA update about the XXAMER Android 4.1.2 Jelly Bean firmware in several countries including- Brazil, Argentina, Chile, Panama, Peru. The Galaxy Tab 3 7.0 recently announced by Samsung, it is an upgraded version of the previous Galaxy Tab 2 7.0. If you own the device then you can Download the XXAMER Android 4.1.2 Jelly Bean official firmware on your device through OTA. Samsung Official KIES utility is not available at this moment. If you are looking for any manual update guide, then You can follow our simple tutorial for a manual installation of the XXAMER Android 4.1.2 Jelly Bean firmware on Galaxy Tab 3 7.0 3G T210. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Tab 3 7.0 3G T210 because to install this firmware we will use ODIN utility. After installing official firmware XXAMER Android 4.1.2 Jelly Bean you can always root your Galaxy Tab 3 7.0 3G T210 with the help of proper rooting method.

if you don’t know, the  Samsung Galaxy Tab 3 7.0 featuring a 7.0’ TFT capacitive touch screen display with 16M colors, 1024×600 pixels resolution, latest TouchWiz UX UI, 1.2 GHz dual-core processor, 1GB RAM, support 64GB MicroSD, 3.15MP back camera and 1.3MP front camera, preloaded with Android 4.1.2 Jelly Bean and upgradable to Android 4.2.2 Jelly Bean operating system.

Continue reading this page to install XXAMER Android 4.1.2 Jelly Bean official firmware update in Galaxy Tab 3 7.0 3G T210 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAMER Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Tab 3 7.0 3G T210 to XXAMER Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Samsung Galaxy Tab 3 7.0

Android 4.1.2 XXAMER Firmware Details:

PDA: T210XXAMER
CSC: T210ZTOAME5
Version: 4.1.2
Date: May, 2013

Warning!

We at Rooted Android write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Tab 3 7.0 3G T210. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the tablet should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android tablets.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Rooted Android is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Tab 3 7.0 3G T210 Latest USB Drivers

Since you will need to connect your tablet to your PC, so you will need to have your Galaxy Tab 3 7.0 3G T210 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAMER Android 4.1.2 Jelly Bean official firmware update on Galaxy Tab 3 7.0 3G T210.

Pages: 1 2

Update Galaxy Tab 3 7.0 3G T210 via XXAMES Android 4.1.2 Jelly Bean Official Firmware

We have already covered the official firmware for Samsung Galaxy Tab 3 7.0 3G SM-T210 for those who living in India and now here is XXAMES Android 4.1.2 Jelly Bean Official Firmware for the users those who living is Afghanistan, Pakistan and United Arab Emirates (UAE). Galaxy Tab 3 7.0 recently announced by Samsung, it is an upgraded version of the previous Galaxy Tab 2 7.0. The device is not yet started shipping all over, expecting go on sale from the next month (June 2013). The models that expecting to hands on by next month are- Galaxy Tab 3 7.0 GT-P3200, Galaxy Tab 3 7.0 3G SM-T210, Galaxy Tab 3 7.0 WiFi SM-T211 and might be a LTE version that is Galaxy Tab 3 7.0 LTE SM-T215. Download of XXAMES Android 4.1.2 Jelly Bean official firmware is currently available through OTA. You can follow our simple tutorial for a manual installation of the XXAMES Android 4.1.2 Jelly Bean firmware on Galaxy Tab 3 7.0 3G T210 after the device go hands on. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Tab 3 7.0 3G T210 because to install this firmware we will use ODIN utility. After installing official firmware XXAMES Android 4.1.2 Jelly Bean you can always root your Galaxy Tab 3 7.0 3G T210 with the help of proper rooting method.

if you don’t know, the  Samsung Galaxy Tab 3 7.0 featuring a 7.0’ TFT capacitive touch screen display with 16M colors, 1024×600 pixels resolution, latest TouchWiz UX UI, 1.2 GHz dual-core processor, 1GB RAM, support 64GB MicroSD, 3.15MP back camera and 1.3MP front camera, preloaded with Android 4.1.2 Jelly Bean and upgradable to Android 4.2.2 Jelly Bean operating system.

Continue reading this page to install XXAMES Android 4.1.2 Jelly Bean official firmware update in Galaxy Tab 3 7.0 3G T210 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAMES Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Tab 3 7.0 3G T210 to XXAMES Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Samsung Galaxy Tab 3 7.0

Android 4.1.2 XXAMES Firmware Details:

PDA: T210XXAMES
CSC: T210OJVAME6
Version: 4.1.2
Date: May, 2013

Warning!

We at Rooted Android write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Tab 3 7.0 3G T210. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the tablet should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android tablets.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Rooted Android is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Tab 3 7.0 3G T210 Latest USB Drivers

Since you will need to connect your tablet to your PC, so you will need to have your Galaxy Tab 3 7.0 3G T210 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAMES Android 4.1.2 Jelly Bean official firmware update on Galaxy Tab 3 7.0 3G T210.

Pages: 1 2

Update XXAMEQ Android 4.1.2 Jelly Bean Official Firmware on Galaxy Tab 3 7.0 3G T210

Samsung recently announced Galaxy Tab 3 7.0, an upgrade version of the previous Galaxy Tab 2 7.0. The device is not yet started shipping all over, will be go on sale from the next month (June 2013). The models that expecting to hands on by next month are- Galaxy Tab 3 7.0 GT-P3200, Galaxy Tab 3 7.0 3G SM-T210, Galaxy Tab 3 7.0 WiFi SM-T211 and might be a LTE version that is Galaxy Tab 3 7.0 LTE SM-T215. Samsung started preparing firmware update for Galaxy Tab 3 7.0 and recently rolling out the XXAMEQ Android 4.1.2 Jelly Bean official firmware update for the Galaxy Tab 3 7.0 3G SM-T210 in India. You can follow our simple tutorial for a manual installation of the XXAMEQ Android 4.1.2 Jelly Bean firmware on Galaxy Tab 3 7.0 3G T210 after the device go hands on. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Tab 3 7.0 3G T210 because to install this firmware we will use ODIN utility. After installing official firmware XXAMEQ Android 4.1.2 Jelly Bean you can always root your Galaxy Tab 3 7.0 3G T210 with the help of proper rooting method.

if you don’t know, the  Samsung Galaxy Tab 3 7.0 featuring a 7.0’ TFT capacitive touch screen display with 16M colors, 1024×600 pixels resolution, latest TouchWiz UX UI, 1.2 GHz dual-core processor, 1GB RAM, support 64GB MicroSD, 3.15MP back camera and 1.3MP front camera, preloaded with Android 4.1.2 Jelly Bean and upgradable to Android 4.2.2 Jelly Bean operating system.

Continue reading this page to install XXAMEQ Android 4.1.2 Jelly Bean official firmware update in Galaxy Tab 3 7.0 3G T210 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAMEQ Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Tab 3 7.0 3G T210 to XXAMEQ Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Samsung Galaxy Tab 3 7.0

Android 4.1.2 XXAMEQ Firmware Details:

PDA: T210XXAMEQ
CSC: T210ODDAME6
Version: 4.1.2
Date: May, 2013

Warning!

We at Rooted Android write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Tab 3 7.0 3G T210. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the tablet should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android tablets.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Rooted Android is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Tab 3 7.0 3G T210 Latest USB Drivers

Since you will need to connect your tablet to your PC, so you will need to have your Galaxy Tab 3 7.0 3G T210 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAMEQ Android 4.1.2 Jelly Bean official firmware update on Galaxy Tab 3 7.0 3G T210.

Pages: 1 2